Coefficient of Friction Tester

Manufacturer: UBTECH

The USDIT-500C spinning drop interfacial tensiometer generates a centrifugal force field through high-speed rotation, altering the balance between gravity and interfacial tension in the system, thereby achieving accurate measurement of low/ultra-low interfacial tension (down to 10⁻⁷ mN/m). With its superior system stability and user-friendly operating system, USDIT-500C has become a reliable tool for interfacial science research. Its applications are wide-ranging, covering laboratory research and field monitoring in tertiary oil recovery (EOR), performance evaluation of surfactants and foam systems, R&D and quality control of industrial products such as fuel oil, inks, and coatings, as well as interfacial behavior research in pharmaceuticals, paper products, photosensitive materials, and pesticides.

Manufacturer: UBTECH

The instrument is designed and made as per the standards GB/T4509 Standard Test Method for Penetration of Bitumen, T0604 Bitumen Penetration Test in the standard JTG E20-2011 Specifications and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering and ASTM D5. The instrument is suitable to determine the penetration of highway bitumen, modified asphalt, as well as liquid petroleum asphalt or residue of emulsified asphalt after evaporation.

Manufacturer: UBTECH

The freezing point osmometer operates in accordance with Raoul's freezing point theory. It relies on the principle that the freezing point depression of a solution is directly proportional to its molar concentration. Utilizing a highly sensitive temperature-sensing element, the instrument measures the freezing point of various solutions, enabling the derivation of osmotic pressure molar concentration. This theoretical approach finds extensive application in the testing and research of osmotic pressure molar concentration, particularly in fields such as pharmaceuticals, pharmaceutical analysis, and biological and food therapy.

Manufacturer: UBTECH

Ideal for quality control in industries such as beverages, pharmaceuticals, and chemicals.

Manufacturer: UBTECH

Rheometer is an advanced rheometer instrument for controlled rate and controlled stress measurements.

Manufacturer: UBTECH

The texture analyzer UTA-5000 is applicable to test physical properties of food and other consumer products.

Manufacturer: UBTECH

With a wide measuring range from 0 to 1000 NTU, the portable turbidimeter is able to meet the testing needs of a wide range of turbid water samples. It is suitable for applications where higher turbidity samples need to be measured.

Manufacturer: UBTECH

Get fast and accurate results with our melting point meters. Now the best melting point tester for sale at affordable price.

Manufacturer: UBTECH

The gas permeability tester UGPT-101 is based on the differential pressure method, and is professionally used to determine the gas transmission rate (GTR) and permeability of plastic films, composite films, high barrier materials, sheeting and metal foils at different temperatures..

Manufacturer: UBTECH

UCOF-5 coefficient of friction tester is specialized in measuring the static and kinetic coefficient of friction of plastic film and sheet, rubber, paper, paperboard, woven bag, metal composite belt for communication cable and optical cable, conveyor belt, wood, coating, brake block, wiper, shoe material, tire, and other materials when sliding. By measuring the friction coefficient (or smoothness) of materials, the quality index can be adjusted or controlled to meet the users’ requirements. It can also be used to measure the smoothness of cosmetics, eye drops, and other daily chemical products.

Manufacturer: UBTECH

UBCT-20 bottle cap torque tester is designed to measure the open force and lock force of the cap of bottle, spout bag and flexible tube package. The forces can influence the transportation and consumption of products greatly and are very important for the online and offline production.

Manufacturer: UBTECH

The UHST-300 heat seal tester is designed to determine the optimal heat seal parameters, including dwell time, sealing pressure, and sealing temperature, for plastic films, flexible composite films, plastic-coated paper, and other heat-sealable materials.

Manufacturer: UBTECH

UAD-127 Bottle Perpendicularity Tester is suitable for measuring the perpendicularity (deviation) of ampoule, vial, medicine bottle, cosmetic bottle, ect.

Manufacturer: UBTECH

UGBTS-70 Glass Bottle Thermal Shock Resistance Tester is suitable for testing the thermal shock resistance of glass containers and jars which are required to withstand sudden changes in temperature in service.

Manufacturer: UBTECH

UALT-04 Intelligent Leak Tester is professionally designed for the leakage test of the soft package used in food, wipe, medical, electronic components, stationery, and other industrial products.

Manufacturer: UBTECH

The tester utilizes the principle of polarized light interference to examine the internal stress in glass or the birefringence effect in crystals. Equipped with sensitive color plates and employing the 1/4 wave plate compensation method, the polarizing stress meter can qualitatively or semi-quantitatively measure the optical path difference in glass based on the interference color sequence observed in the polarizing field. Additionally, it can accurately gauge internal stress by considering the wall thickness.

Manufacturer: UBTECH

Bottle wall thickness measurement is suitable for measuring the bottom thickness and wall thickness of beer bottle, vial, ampoule, injection bottle,and oral liquid bottle.

Manufacturer: UBTECH

Our intelligent tensile tester UITT-500 is suitable for testing the elongation rate, peel force, deformation rate, heat seal strength, open force, tear resistance, puncture resistance, low speed unwinding force of plastic film, composite film, adhesive tape, medical patch, protection film, release paper, foil, non-woven, rubber, paper, etc. It is specialized in testing the mechanical properties of various flexible packaging materials.

Manufacturer: UBTECH

The Water Vapor Transmission Rate (WVTR) Tester is manufactured based on the infrared sensor method and is applicable to test the water vapor transmission rate of medium and high barrier materials such as plastic films, composite films, sheets, papers and other various materials.

Manufacturer: UBTECH

UPOL-A Series automatic polarimeter with automatic photoelectric inspection technology, boasts accurate and reliable measurement, convenient operation. By detecting the optical rotation, the density, content and purity of substances can be analyzed and determined. It's widely used in pharmaceutical, petroleum, food, chemicals, flavors, spices, sugar marking and other industries, and universities and research institutes. New upgraded models: UPOL-A810P/ UPOL-A850P adopt brilliant Android system and communication ports.

Manufacturer: UBTECH

This intelligent wet and dry laser particle size analyzer is widely used in cement, ceramics, pharmaceuticals, emulsions, paints, dyestuffs, pigments, fillers, chemicals, catalysts, drilling mud, abrasives, lubricants, coal, silt, dust, cells, bacteria, food additives, pesticides, explosives, graphite, photographic materials, fuels, printing ink, metal and non-metallic powders, calcium carbonate, kaolin, coal slurry, and other powdery materials.

Manufacturer: UBTECH

The series is an innovative and well-designed portable refractometer that is advanced in function and rugged.

Manufacturer: UBTECH

The rotational viscometer determines the viscosity of low viscosity liquids in all applications from laboratory to quality control.

Manufacturer: UBTECH

Provides rapid surface tension measurements.

Manufacturer: UBTECH

The UOSM-BF3 osmometer is an instrument designed for determining the osmolality of solutions and various body fluids. It is suitable for the osmolality analysis and testing of intravenous injections, intrathecal injections (among other injections), eye drops, blood, urine, etc. Fully complying with the testing standards specified in the 2020 Edition of the Chinese Pharmacopoeia (ChP), United States Pharmacopoeia (USP), and European Pharmacopoeia (EP).

Manufacturer: UBTECH

The petroleum products density tester is used to determine the density of crude petroleum and liquid petroleum.

Manufacturer: UBTECH

Liquid densimeter can be applied to the field of quality management, cost control, formula researching, chemistry researching laboratory and so on. And it also can be used to measure solvent, adhesive, paint, pitch, resin, chemical oils, edible oil, food additives, drink, dairy products, chemical solution, modern energy, oil fuel, fine chemical engineering, chemical reagent, chemistry researching laboratories,etc.

Manufacturer: UBTECH

Melting Point Apparatus occupies an important position in the chemical industry and medical research. It is an essential instrument for the production of food, medicine, spices, dyes and other organic crystal substances.

Manufacturer: UBTECH

Ideal for quality control in industries such as beverages, pharmaceuticals, and chemicals.

Manufacturer: UBTECH

The photon correlation DLS nanoparticle size and zeta potential analyzer is suitable for the measurement of particle size and surface potential of many different nano emulsions, suspension colloids, etc. It can be widely used in the research and development of fine chemical nanomaterials, surfactants, oligomers, etc. and the quality control of production.

Manufacturer: UBTECH

This portable turbidimeter is ideally suited for both rigorous process control applications and field use.

Manufacturer: UBTECH

The pre-conditioned specimen is mounted in the gas diffusion cell to form a sealed barrier between two chambers. The lower-pressure chamber is first evacuated, followed by the evacuation of the entire cell. Gas is then introduced into the evacuated higher-pressure chamber, creating a constant pressure difference between the two chambers. The gas permeates through the specimen from the higher-pressure side to the lower-pressure side. By monitoring the pressure changes in the lower chamber, the gas permeability and other barrier properties of the specimen can be determined.

Manufacturer: UBTECH

The thickness tester is a high-precision thickness tester using the mechanical contact method, suitable for measuring the thickness of films, sheeting, paper, corrugated paperboard, textiles, non-woven fabrics, solid insulation materials, and more.

Manufacturer: UBTECH

The test specimen is mounted in the diffusion cell, which is divided into a dry chamber and a controlled humidity chamber. A flow of dry nitrogen sweeps the dry side of the specimen, while the dry nitrogen carries the water vapor permeating through the specimen from the controlled humidity chamber to an infrared sensor. This sensor generates proportional electrical signals based on the water vapor concentration. The water vapor transmission rate is determined by analyzing and calculating these electrical signals. For package samples, dry nitrogen flows inside the package, while humidified nitrogen flows outside.

Manufacturer: UBTECH

Rheometer is an advanced rheometer instrument for controlled rate and controlled stress measurements.

Manufacturer: UBTECH

The digital viscometer accurately measures the viscosity of medium to medium viscosity fluids in all applications from laboratory to quality control.

Manufacturer: UBTECH

Using 32-bit ARM processor and high-precision AD chip, the test data and parameters are recorded in real time and displayed by curve.

Manufacturer: UBTECH

Handheld digital refractometers are portable, reliable and accurate. Ensure the correct concentration is measured every time.

Manufacturer: UBTECH

UPOL-D4 disc polarimeter measuring range from -180° to+180°. The instrument is suitable for measuring the optical rotation of the optically active substances. Measure accuracy: 0.05°. Suitable for scientific research and teaching industry, pharmaceutical and chemical industry, food and sugar industry, and other industrial applications.

Manufacturer: UBTECH

The open cup flash point tester is fully self-contained complete. The operator can do determination as long as connecting with coal gas or other civil gas.

Manufacturer: UBTECH

Ideal for quality control in industries such as beverages, pharmaceuticals, and chemicals.

Manufacturer: UBTECH

This is an innovative and well-designed portable digital refractometer with advanced features and robustness.

Manufacturer: UBTECH

Melting point apparatus occupies an important position in the chemical industry and medical research. It is an essential instrument for the production of food, medicine, spices, dyes and other organic crystal substances.

Manufacturer: UBTECH

Using the gravimetric determination method, the tester creates a constant humidity difference between the two sides of the test specimen at a specified temperature. Water vapor permeates through the specimen and moves to the dry side. By measuring the weight changes of the test dish over time, the water vapor transmission rate and other related parameters can be determined.

Manufacturer: UBTECH

It can measure droplets particles in the air without touch. It's mainly applied to medical atomizer, atomization medicine, various aerosol, spray and other small spray equipment, especially suitable for the national pharmacopoeia for inhalation aerosol,orally inhaled and nasal drug products, spray, powder mist and other particle size distribution testing requirements.

Manufacturer: UBTECH

This portable turbidimeter is ideally suited for both rigorous process control applications and field use.

Manufacturer: UBTECH

UVSC-1C is brinell high temperature rotational viscometer. These series digital high temperature viscometer products below are composed of viscometers and special temperature-controlled heaters. They are used to measure hot melt adhesive, asphalt, paraffin, high polymer, etc. dissolved after heating and can directly display the measurement data. Some products can be equipped with optional data collection analysis and drawing software to collect and analyze data, display and record the viscosity-temperature curve throughout the process. The product measurement performance has achieved the international advanced level.

Manufacturer: UBTECH

The Semi-automatic polarimeter is a robust and simple to operate design that can be used extensively at the teaching level. It is used to measure the purity of pharmaceutical ingredients, quality control of raw materials and the concentration of ingredients in sugar-based substances.

Manufacturer: UBTECH

The instrument is designed and made as per T 0623 and ASTM D88 Bitumen Saybolt Viscosity Test (Saybolt Viscometer Method) in the JTJ052 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is suitable to determine the Saybolt viscosity of bitumen and bituminous mixtures under a constant temperature as per T0623.

Manufacturer: UBTECH

Constant temperature liquid densimeter has notable features of the fast constant temperature speed, high precision, good durability, suitable for quality management, formula development, cost control and other applications, widely used for various oils, petroleum, cosmetics, paints, coatings, inks, flavors, spices, chemical solutions, chemical reagents, resins, adhesives, edible oils, beverages, pharmaceuticals, auxiliaries, synthetic agents, metal processing, thermal power, electroplating industries, Acid and alkali salt solutions, chemicals, construction, chemical trade, universities, testing agencies, government agencies, teaching institutions, and other industries.

Manufacturer: UBTECH

UMPA-20/UMPA-30 video melting point apparatus perfectly integrate video technology into melting point measuring. It not only provides users with reliable melting point test result, but also intuitively displays temperature curve and real-time video image, and achieves the function of save, replay the video and so on . It also provides better help for users to observe melting process of sample.

Manufacturer: UBTECH

Measurement of transmittance and haze of the parallel plane sample of all transparent and translucent (plastic board or sheet).

Manufacturer: UBTECH

Using the gravimetric determination method, the tester creates a constant humidity difference between the two sides of the test specimen at a specified temperature. Water vapor permeates through the specimen and moves to the dry side. By measuring the weight changes of the test dish over time, the water vapor transmission rate and other related parameters can be determined.

Manufacturer: UBTECH

Intelligent software provides data analysis: Differential distribution, cumulative distribution, standard classification, volume distribution, area distribution, quantity distribution, R-R distribution, custom classification,and item classification, with functions such as averaging, statistics, comparison, and pattern transformation.

Manufacturer: UBTECH

Viscometers determine the viscosity of low viscosity liquids in all applications from laboratory to quality control. DV series digital viscometers are the most commonly used viscometers at present, basically covering all functions of UVSC-S and UVSC-N series products, with a wider measurement range. DV-2 series products can display shear rate and shear stress. The DV program-controlled download software which is optional can download the custom measurement program to the viscometer to achieve automated or personalized operation.

Manufacturer: UBTECH

This portable digital refractometer combines compactness, portability and user-friendliness for a variety of liquid measurement scenarios, providing users with an efficient and accurate testing solution.

Manufacturer: UBTECH

It adopts an 8-inch IPS high-definition capacitive screen. Using 32-bit ARM processor and high-precision AD chip, the test data and parameters are recorded in real time and displayed by curve.

Manufacturer: UBTECH

The Pensky-Martens Closed-Cup Flash Point Tester is used in the petrochemical, chemical, and pharmaceutical industries to accurately measure the flash point of liquids, ensuring safety and regulatory compliance.

Manufacturer: UBTECH

Solid densimeter can be applied for materials of rubber, plastic, cables, glass, powder, ceramics, fireproofing materials, magnetic materials, mechanical parts, mineral and rock, cement, metal and precious metal, jewellery and in new materials researching laboratory.

Manufacturer: UBTECH

UMPA-50, UMPA-70, UMPA-90 automatic video melting point apparatus perfectly integrate video technology into melting point measuring. It not only provides users with reliable melting point test result, but also intuitively displays temperature curve and real-time video image, and achieves the function of save, replay the video and so on . It also provides better help for users to observe melting process of sample.

Manufacturer: UBTECH

The laser particle size analyzer is based on full measuring range of Mie scattering theory. On the basis of laser illuminate size and the size distribution regular pattern of scattering light energy that comes from the sample inversely calculate out sample group.

Manufacturer: UBTECH

DV-H series digital high temperature viscometer products below are composed of viscometers and special temperature-controlled heaters. They are used to measure hot melt adhesive, asphalt, paraffin, high polymer, etc. dissolved after heating and can directly display the measurement data. DV-2H series products can display shear Rate and shear stress. Some products can be equipped with optional data collection analysis and drawing software to collect and analyze data, display and record the viscosity-temperature curve throughout the process.

Manufacturer: UBTECH

Multiparameter benchtop turbidimeter with a total suspended solids measurement mode, 2 to 7 points calibration, selectable 4 turbidity units, the meter is suitable for laboratory use.

Manufacturer: UBTECH

The URF-AD series is an innovative and well-designed automatic digital refractometer that is advanced in function and rugged.

Manufacturer: UBTECH

Solid and liquid densimeter is suitable for the field of quality management, cost control, new formula researching and material studying and so on, can be applied to measure the density of general solid material and plastic particle, powder and liquid.

Manufacturer: UBTECH

Melting point apparatus occupies an important position in the chemical industry and medical research. It is an essential instrument for the production of food, medicine, spices, dyes and other organic crystal substances.

Manufacturer: UBTECH

Suitable for laboratory research, chemical, pharmaceutical and other industrial quality control, environmental monitoring, and high-end material manufacturing.

Manufacturer: UBTECH

The benchtop turbidimeter supports searching for curves, standard values for each standard at calibration, and the corresponding absorbance.

Manufacturer: UBTECH

This ABBE refractometer measures the refractive index of liquids with high accuracy and is suitable for a wide range of applications.

Manufacturer: UBTECH

UVSC-KU2 series digital viscometers are specially used to measure the viscosity of fluids with Krebs as the unit (ie KU value) of paints and coatings. According to the ASTMD562 industry standard, KU value can be converted into Measurements in gm and cP.

Manufacturer: UBTECH

The solid and liquid densimeter is suitable for the field of quality management, cost control, new formula researching and material studying and so on, can be applied to measure the density of general solid material and plastic particle, powder and liquid.

Manufacturer: UBTECH

This ABBE digital refractometer uses the latest LED illumination technology to provide a clear image of the reading and automatic temperature correction ensures accurate readings every time.

Manufacturer: UBTECH

Melting point apparatus occupies an important position in the chemical industry and medical research. It is an essential instrument for the production of food, medicine, spices, dyes and other organic crystal substances.

Manufacturer: UBTECH

This viscometer can be widely used to measure the viscosity of oils, paints, food, coatings, paper making, cosmetics, chemicals capsule adhesives, medicines and other fuids.

Manufacturer: UBTECH

The automatic ABBE digital refractometer provide accuracy and repeatability.

Manufacturer: UBTECH

Integrated design structure, control section on the left, experimental section on the right, reasonable partitioning, button panel for easy experimental operation.

Manufacturer: UBTECH

Solid and liquid density meters enable rapid and accurate density measurements of solids, plastics, powders, and liquids.

Manufacturer: UBTECH

Melting point apparatus occupies an important position in the chemical industry and medical research. It is an essential instrument for the production of food, medicine, spices, dyes and other organic crystal substances.

Manufacturer: UBTECH

Featuring a high-performance embedded intelligent touch screen, it ensures user-friendly operation and precise control. The intuitive human-machine interface allows users to effortlessly perform intelligent operations guided by on-screen instructions.

Manufacturer: UBTECH

High precision mulifunctional solid and liquid densimeter is widely used and with full functions, suitable for the field of quality management, cost control, scientific academies, researching key laboratories. etc.

Manufacturer: UBTECH

URF-DV Digital Refractometer is the leading refractometer featuring wide range, high-precision and multi-wavelength. It can fast and accurately measure the refractive index, average dispersive partial dispersion (i.e., the refractive index of eight common wavelengths, including 706.5, 656.3, 589.3 587.6, 546.1, 486.1, 435.8, 404.7nm) and sugar solution mass fraction (Brix) for transparent or translucent solid or liquid substances. The digital V prism refractomete has following features and functions, such as user-friendly interface, fast test speed, good repeatability, temperature correction, data storage, U disk storage and USB communication interface.

Manufacturer: UBTECH

The high precision automatic refractometer provides user ID classification and tracking, electronic signature, and data tamper-proof functionality. It offers simple, fast, and highly accurate refractive index and sugar content (Brix) measurements, with automatic temperature control.

Manufacturer: UBTECH

The tap density tester is designed for precise measurement of the tapped density of powders and granular materials, widely used in quality control, material research, and pharmaceutical industries to assess the packing characteristics of powders.

Manufacturer: UBTECH

The high-precision gold purity tester will not damage the sample, can quickly, easily, and accurately distinguish and test the K value of gold, the PT value of platinum, the purity percentage of other precious metals, and their density. It is suitable for the jewelry shop,pawn broking, bank, precious-metals recovery, jewelry factory, Gemstone Testing Center, precious metals researching laboratories.etc. It can measure precious metals such as gold, karat gold, platinum, platinum, and silver.