Deionized Water Purifier WP-D10U
Deionized Water Purifier Specifications:
| Model | UWP-D10U | |
|---|---|---|
| Water Supply Requirement | Tap water: TDS<200ppm; Water pressure >0.1Mpa; Water temperature: 5-45℃ | |
| Pure Water Quality | Conductivity | 0.1us/cm (25℃) |
| PH value (25℃) | None | |
| Oxidizable (Calculated as O) | Technical requirements: ≦0.08mg/L; Test results: ≦0.08mg/L | |
| Evaporation Residue (105±2℃) | Technical requirements: ≦1.0mg/L; Inspection results: 0.7mg/L | |
| Inspection Basis | GB/T6682-2008 | |
| Consumption | 25W | |
| Water Output Speed | 10L/h | |
| Control System | Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc. | |
| Safety Performance | Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure). | |
| Purification System | Pretreatment unit, external softening filter (recommended in places with high raw water hardness); | |
| RO Reverse Osmosis Unit | American original RO reverse osmosis membrane/membrane group | |
| Post Purification Unit | Purification column | |
| Standard Accessories | Host + accessory package + 3.2G pressure barrel | |
| External Size(WxDxH)(mm) | 340x460x480mm (Water Purifier) | |
| Shipping Size (WxDxH)(mm) | 535x435x550mm (Water Purifier) 245x245x360mm (Pressure tank) | |
| N.W/G.W | 23kg/25kg (Water Purifier) 2kg/3kg (Pressure Tank) | |
Deionized Water Purifier Features:
- The deionized water purifier has power indicator, pump work indicator, low pressure indicator and system flushing indicator functions.
- Using imported ion filtration membranes and high-pressure, silent pure water pumps, the operation quality is more reliable and it is applicable to a wider range of water quality;
- It has system flushing function: every time before turning on the water machine, di water machine will automatically flush for 30 seconds and then the system will start to make water;
- The di water machine has system protection function: when the water pressure is too low or there is no water, the equipment automatically shuts down, and when the water source comes in, the equipment automatically turns on;
- The WP-DU series ultrapure water machine has an online water quality monitoring function, which can monitor the incoming water quality (located above the instrument, near the function detection area, indicated by a digital tube), RO water quality and temperature, and pure water quality and temperature in real time.
-ubtech.wPXrsi.jpg)
-ubtech.Bpz3fr.jpg)
-ubtech.94LRPg.jpg)